For the dedicated log home purest, looking for a home like those of the
pioneers, we offer handcrafted
homes in chink-style form. This is the
log home look of America’s pioneers, but with today’s precision and
technology. We use highly
skilled woodsmen to pre-build our handcrafted homes at a yard in Montana
from which point the logs are disassembled, numbered as to exact location,
and trucked to your building site for re-assembly. You can pick the size
wall log that is best for your home, within a 2” range.
Most are built using 10”-12” average diameters.
For the most part, we use lodgepole pine logs out of the mountains
of the west, due to their excellent structural integrity, minimal taper,
aesthetic characteristics and availability. We use only the best
dead-standing timbers with the lowest possible moisture content to allow for
minimal shrinkage and we incorporate a tight-fitting saddle-notch corner
joinery to assure a weather-tight seal.
All this results in log wall settling on your home that is
negligible.
Our clients may choose between a variety of log tail styles (at the
corners), including plumb, staggered or arched at the top or arched at both
top and bottom.
Alpenglow Log & Timber Homes provides expert advice throughout your
project, including a technician at your building site for the first two days
of the log re-assembly. This
service lessens the need for you to have a seasoned log home builder,
although it is advisable to hire a general contractor that has some
experience with log homes.
|
Our rustic, handcrafted log home packages include every type of log
component imaginable, including:
- Wall logs to your specified plate height,
- Exposed, structural log members for the roof system (to
create the most dramatic of effects),
- Exposed, structural floor joist beams,
- Custom log stairs (for applicable conditions in two story
homes),
- Log accent posts for applicable point-load locations and
beam support,
- Log handrail and guardrail posts.
- Gable wall logs are optional,
- Log window and door bucks, which double as your trim, are
optional.

Besides the log components themselves, we include all the accessory
components needed to assemble the system, such as:
- Lag screws and all-threaded thru-bolts, per site-specific
engineering
- Sashco Log Builder caulking compound
- Sashco chinking compound in the color of your choice
- Backer-rod
- Window bucks
- Spline material for window and door openings
|